Care And Cleaning - Symmons Allura S-7602-RP Instrucciones De Instalación Y Servicio

■ Check for leaks around valve
assembly and all pipe fittings.
9)
Set temperature limit stop
screw
The temperature limit stop screw
limits valve handle from being
turned to maximum position
resulting in excessive hot water
discharge temperatures.
■ Place handle on control spindle
and open valve to maximum
desired temperature.
■ Turn stop screw clockwise until
it seats. Reference Figure 3.
Warning:
adjust the Temp
limit stop screw
properly may result
in serious scalding.
Shower Trim Installation
1)
Attach dome cover
2)
Apply dome gasket
protective
tape
3)
Attach escutcheon
1
rear view
Failure to
2
4)
Attach handle
5)
Attach showerhead
Page 3
6)
Attach tub spout
Tub & Shower Operation
Diverter handle
Water flow to the tub
Water flow to the showerhead

Care and Cleaning

Clean finished area by using mild
soap and water or a non-abrasive
cleaner and then quickly rinse. A
non-abrasive wax may be used to
preserve finish area.