Care And Cleaning; Troubleshooting Chart - Symmons Elm Trim Serie Manual De Operación Y Mantenimiento

5503-TRM, 5505-TRM, 5506-TRM
Elm Trim Series
™
Operation & Maintenance Manual

Care and Cleaning

1) Clean finished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.
Trouble Shooting Chart
Problem
Finish is spotting.
Showerhead is leaking from head
when valve is in "off" position.
Showerhead is leaking from shower
arm when valve is in "on"
position.
Symmons Industries, Inc.
7
©2013 Symmons Industries, Inc.
Cause
Elements in water supply may cause
water staining on finish.
Hot and cold washers are worn
or foreign matter (dirt, chips) is
lodged between washers and seat
surfaces.
Coupling connecting showerhead
to shower arm is cracked or washer
inside coupling is worn.
■ ■
31 Brooks Drive Braintree, MA 02184
■ ■
www.symmons.com gethelp@symmons.com
Solution
Clean finished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then
quickly rinse with water.
See Temptrol valve instructions and
replace washers using repair
kit TA-9.
Inspect coupling and washer
and replace shower head if
necessary.
■ ■
(800)796-6667 Fax: (800)961-9621
■
ZV-1076 REV A 10/22/2013