Stell SHO 3310 Manual De Instrucciones página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Mounting the brackets on the TV set
TV set with fl at rear wall (Fig. 5A)
First, fi nd the screws suitable for using on the TV set (D/E): try to screw them in manually in the holes on the
back of the TV set. If you feel resistance stop screwing in immediately! Once you fi nd the screw with correct
threat, proceed according to the drawing 5. Attach the matching washer on the screw (F) and then screw the
screw into the bracket B/C and fi nally in the TV set. Check that the brackets are fastened vertically. They are
mutually parallel and the locking bolts are facing towards the outer edge of the TV.
TV set with curved rear wall (Fig. 5B)
First, fi nd the screws suitable for using on the TV set (D/E): try to screw them in manually in the holes on the
back of the TV set. If you feel resistance stop screwing in immediately! Once you fi nd the screw with correct
threat, proceed according to the drawing 5. Attach the matching washer on the screw (F), spacer (H) and
then screw the screw into the bracket B/C and fi nally in the TV set. Check that the brackets are fastened
vertically. They are mutually parallel and the locking bolts are facing towards the outer edge of the TV.
Attaching the TV to the bracket and securing with safety bolts
Warning: Handling some TV sets requires help of another person. The manufacturer is not liable for injury or
damage to property caused by improper handling!
First, hook the brackets attached to the TV set (B+C) on the top edge of the body of the holder A, then push
the lower part of the brackets toward the bottom part of the holder (Fig. 6). Then, using Phillips screwdriver,
tighten the locking bolts 1 (Fig. 7).
Congratulation, the installation is done. We wish you a pleasant experience while watching TV mounted on
the wall mount.
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING
Take the used packaging material to the municipal waste disposal.
PRODUCT DISPOSAL AFTER END OF LIFE
Dispose of equipment after the end of life in the designated municipal solid waste place
This product meets all the basic requirements of EU directives that apply to it.
13 – EN

Publicidad

Tabla de contenido
loading

Tabla de contenido