AR Elite Serie Guia De Inicio Rapido página 6

Stereo Setup
4 Enable Bluetooth on your
device (if it isn't already on).
5 Select AR Saratoga Stereo
from the list of Bluetooth
devices available.
If you don't see AR Saratoga Stereo in the list of Bluetooth devices on your phone, choose
"Scan" from your phone's Bluetooth menu.
Note: The process of enabling Bluetooth and connecting varies from device to device. See
your device's owners manual for more information and specific instructions.
6 Start playing music on your
Bluetooth device.
Note: Make sure your Bluetooth device is
set to at least 75% volume.
6
If you have two speakers...
Make sure the button on the top of the left
speaker is blinking white. (If it isn't, press and
hold the button on the top of the left
(Pair)
speaker until the speaker gives an audio signal.)
Note: If you've previously paired a different
Bluetooth device with this speaker, the speaker
will automatically attempt to reconnect to that
device when you switch the speaker on. If you
want to pair to a new device, press and hold the
button on the speaker until the speaker gives
an audio signal.
The left speaker says "Connected"
when it's finished connecting to your
smartphone. The button on the top
of the speaker turns solid white.
Left speaker
Solid white
The speakers start streaming your
music wirelessly, in True Stereo.
To control the volume, press the + and – buttons
on the top of the left speaker, or use the volume
controls on your Bluetooth device.