AR Elite Serie Guia De Inicio Rapido página 8

Tour of the Elite Series wireless speaker
Top
Volume – and + buttons increase or
decrease the volume of the speaker's
audio.
Pair button initiates pairing with a
Bluetooth device.
Speaker On/Off button turns the
speaker on and off. It also shows the connection status of each speaker.
If you're using the Single-Speaker Setup:
Solid blue means the speaker is connected via Bluetooth.
Fast blinking blue means the speaker is ready to pair via Bluetooth.
Slow blinking blue means the speaker is reconnecting via Bluetooth.
Solid white means an audio cable is plugged into the Aux In jack.
If you're using the Stereo Setup (2 Speakers):
Solid white means the right speaker is linked for stereo sound.
Slow blinking white means the two speakers are trying to link for stereo sound.
Fast blinking white (left speaker only) means this speaker is ready to pair via
Bluetooth.
Solid blue means an audio cable is plugged into the Aux In jack.
Lighting buttons control the speaker's multi-mode lighting.
When the speaker's off...
The Mode button turns a white light on or off.
When the speaker's on...
The Mode button cycles through the multiple lighting modes: Solid on, Breathe mode,
Dance mode, Party mode, and Off.
The Color button cycles through the 8 available colors for Solid on and Breathe
modes.
Back
Battery light shows the charging status of
the speaker's rechargeable battery: red when
charging, green when fully charged.
DC In jack connects to the AC adapter provided to power the speaker.
Left-Mono-Right switch lets you set up two speakers as a stereo pair (Left and Right).
Otherwise, this switch should be set to Mono.
Aux In jack lets you connect directly to the speaker to listen to an audio source.
8