Pihernz JOPIX GS-60 Manual De Instrucciones página 23

No. LCD display
1
2
3
4
5
6
7
8
9
10
11
12
13
Function
CTCSS/DCS encode/decode.
Beep sound.
RF power setting.
Scan type setting
HI-CUT setting.
Microphone gain.
Microphone type.
VOX sensitivity.
VOX time.
Talkback level control.
Noise blanker.
Offset direction.
RF gain level control.
English - 9 -
Settings
oF: CTCSS/DCS is OFF.
CT: 67.0 Hz ~ 250.3 Hz.
DT: D023N ~ D754N.
Note: This function is optional.
on: Turn on beep sound.
oF: Turn off beep sound.
Default: on.
LO: Low power.
nl: Middle power.
HI: High power.
Default: LO.
Note: Function only available
for HF or HAM models.
Sq: Squelch scan.
tI: Time scan.
Default: SQ.
oF: Turn off HI-CUT function.
On: Turn on HI-CUT function.
Default: oF.
1 ~ 9, total 9 levels.
Default: 6.
EL: Electronic.
dy: Dynamic.
Default: EL.
Note: Speak into microphone
and watch the S-meter to
choose wanted mic. gain.
1 ~ 9, total 9 levels.
Default: 3.
1 ~ 9, total 9 levels.
Default: 4.
oF, 1 ~ 9.
Default: oF.
oF: Turn off ANL/NB function.
on: Turn on ANL/NB function.
Default: oF.
oF: Turn off offset.
Offset -: TX frequency low
than RX frequency.
Offset +: TX frequency high
than RX frequency.
Note: Function only available
for HF or HAM models.
Level AU 03, 06, 09 ~ 48.
Default: oF.
Note: If the AUTO
function is on, the transceiver
will turn on the automatic RFG
function.
RFG