Resume Factory Default; Technical Specifications; General; Transmitter - Pihernz JOPIX GS-60 Manual De Instrucciones

(8) Short press microphone [UP] / [DOWN] key or transceiver [▲] / [▼] key to choose
the channel.
(9) Short press [EMG] key to validate the channel and the mode blinks on LCD.
(10) Short press microphone [UP] / [DOWN] key or transceiver [▲] / [▼] key to
choose the mode AM or FM.
(11) Short press [EMG] key to validate the mode and exit setting.
(12) Long press [EMG] key or wait 10 seconds to store and exit MENU.
NOTE:
- This function is only available for HF or HAM models.

5.16.- RESUME FACTORY DEFAULT:

(1) Long press [EMG] key to enter settings menu.
(2) Short press microphone [UP] / [DOWN] key or transceiver [▲] / [▼] key to choose
reset function, LCD displays "RE SET".
(3) Short press [EMG] key to enter menu selection, "RE SET" flashes in the LCD.
(4) Long press [EMG] key until LCD only displays "RE SET".
(5) Release [EMG] key, the transceiver automatically reseted.

6.- TECHNICAL SPECIFICATIONS:

6.1.- GENERAL:

- Frequency range:
- Modulation:
- Frequency stability:
- Frequency response:
- Operating temperature:
- Antenna impedance:
- Input voltage:
- Current drain:
- Dimensions:
- Weight:
- Duty cycle:

6.2.- TRANSMITTER:

- RF output power:
- Spurious emissions:
- Distortion:

6.3.- RECEIVER:

- Sensitivity:
- Image rejection:
- Adjacent channel selectivity:
- Intermediate frequencies:
- Audio output power:
27 MHz citizen band (According to the programmed
multistandard mode).
AM/FM.
±5 ppm.
300-3000 Hz.
-20 ºC to +55 ºC.
50 Ω.
12 / 24 VDC (According transceiver version).
3 A (maximum).
185 x 124 x 38 (mm).
620 gr.
100 % (TX-RX-Standby).
4 W (FM/AM).
<4 nW.
<5.
<1 µV for 10 dB (S+N)/N.
70 dB.
60 dB.
1st: 10.695 kHz / 2nd: 455 Hz.
2 W @ 8Ω (10 % distortion).
English - 11 -