Bestway 58500 El Manual Del Propietario página 7

Filter:
This function is used to filter pool water
and should be positioned here 99% of the time.
Water is pumped through the sand filter, where it
is cleaned and returned to the pool.
C
A
Backwash:
This function is used to
clean the sand bed; water is pumped down
through the Collector Hub, upwards through
the sand bed, and deposited out of Port D.
C
A
D
Drain:
This function drains water from the pool;
another filter bypass setting, water is pumped and
deposited out of Port D, instead of returning it to
the pool.
C
A
D
B
B
B
7
Closed:
This function stops water
flowing between the sand filter and the pool.
C
A
Rinse:
This function for initial startup, cleaning, and
sand bed leveling after Backwash; water is pumped
downwards through the sand bed, up through the
Collector Hub and deposited out of the valve Port D.
C
A
D
Circulate:
This function circulates pool water
bypassing the sand filter; use this function if the filter
is broken to collect debris in the Debris Screens.
C
A
B
B
B