lauson Audio CP441 Manual De Instrucciones página 7

PROGRAM METHOD
(1)Press the [PROGRAM] key at STOP mode, system will go to PROGRAM mode.
-The PRG icon and P01 will blink at 2Hz. This prompts the user to enter the first songs in
the program PLAY list.
(2)The user can select the desire tracks by using [NEXT], [BACK] keys.
Once these keys are pressed, the Display will show the selected track.
(3)After select the desired track, press [PROGRAM] key again and it will be stored in the memory.
Mp3 Maximum 99
steps (2) to (3) procedures.
(4)If press the [STOP] key during the program mode, then the selected TRACK will be stored
in the memory and return to STOP mode (Continuous Play mode)
(5)If press the [PLAY] key during the program mode, it will start the program PLAY mode.
PLAY start from P01 Track
Erasing a program
You can erase the content of the memory by:
- While playing, press STOP button twice.
- Opening the CD door
- Select the other mode.
USE AUX
To listen music with a mp3 discman walkman
1.Connect to the AUX .
2.press function selector to AUX, the sound source of the mp3
or discman or walkman will output from the unit.
-Press the volume control to adjust the volume.
-The unit can't control the player.
and CD Maximum 20 tracks can be programmed when Repeat
、 、 .
EN-6