WEG CFW500-IOR-B Guía De Instalación, Configuración Y Operación página 8

IOR Plug-in Module
The location of the DIP switches to select the kind of
analog output and input signal can be better viewed in
figure A.2. To use the analog inputs and/ or outputs with
signal in current, switch S1 and related parameters must
be set as indicated in
the control connections see chapter 3 - Installation and
Connection of the CFW500 user's manual.
NOTE!
The digital input signal DI5 is allways NPN
input instead of P0271 configuration.
8 | CFW500-IOR-B
Figure 2: Control connections
table 1. For further details about