Important Safeguards - Andis BGRC Manual De Instrucciones

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be
followed, including the following: Read all instructions before using the Andis Clipper.
DANGER:
To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water. Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in,
or drop into, water or other liquid.
4. Except when charging, always unplug this appliance after using.
5. Always unplug this appliance before cleaning, removing or assembling parts.
WARNING:
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Close supervision is necessary when this appliance is used by, on, or near children or individuals
with certain disabilities.
2. Use this appliance only for its intended use as described in this manual. Do not use attachments
not recommended by Andis.
3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it
has been dropped or damaged, or dropped into water. Return the appliance to an Andis Service
Center for examination and repair.
4. Keep cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen
is being administered.
7. Do not use this appliance with a damaged or broken comb or blade, as injury to the skin may
occur.
8. To disconnect remove plug from outlet.
9. Plug charger directly into receptacle - do not use an extension cord.
10. Unplug charger before plugging or unplugging appliance.
11. Use of charger not sold by Andis may result in risk of fire, electric shock, or injury to person.
12. Do not disassemble charger; take it to an Andis Authorized Service Station when repair is
required. Incorrect reassembly may result in a risk of electric shock or fire.
13. The batteries in this clipper have been designed to provide maximum trouble-free life. However,
like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to
replace the batteries.
14. To preserve natural resources, please recycle or dispose of expired battery pack properly. This
product contains a nickel-cadmium battery. They must be disposed of properly. Local, state,
or federal laws may prohibit disposal of nickel-cadmium batteries in ordinary trash. Consult your
local waste authority or call 1-800-822-8837 for information regarding available recycling and/or
disposal options.
15. Battery pack removal and preparation for recycling:
WARNING: Upon removal, cover the battery pack's terminals with heavy duty
adhesive tape. Do not attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium batteries must be recycled or
disposed of properly. Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep away from children.
Failure to comply with these warnings could result in fire and/or serious
injury.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS INTENDED FOR COMMERCIAL USE
Model BGRC Cord Pack Use
1. Models BGRC/BGR+ will run on an average of 3800 SPM with
the cord pack attached.
2. Models BGRC/BGR+ can be used with either the cord pack or the
battery.
3. Remove the transformer wall plug and clipper from the carton.
4. With the clipper in the off position, insert the adapter plug into
the bottom of the clipper. Note that the adapter plug is fitted with
a tongue to align properly with the groove in the clipper. Once
the adapter plug and clipper are aligned, press firmly together.
You may hear a click as the adapter plug contacts engage.
5. Plug the transformer wall plug into the AC outlet as identified on
the carton.
6. The clipper is now ready to be used.
See page 6 for clipper use
1
Tongue
Adapter
Plug
Transformer
Wall Plug
2