Safety Instructions - Powerfix Profi PDM 300 B1 Manual De Instrucciones

Resistance
Range
200Ω
2kΩ
20kΩ
200kΩ
2MΩ
20MΩ
Overload protection: 300V
Function generator
Signal
1kHz square wave signal
The specified precision in ± (% of the display + number of digits) is valid for 5% to 100% of the
respective measuring range and is guaranteed for a period of one year at an ambient temperature from
18°C to 28°C and maximum air humidity of 75%. The accuracy is not guaranteed under different
conditions.

4. Safety instructions

Before using this multimeter for the first time, always read the following instructions and pay attention to
all warnings, even if you are familiar with handling electronic devices. Store these instructions in a safe
place for future reference. If you sell the multimeter or pass it on, always include these instructions.
WARNING! This symbol indicates important information for safe operation of the
multimeter and the safety of the user.
This symbol indicates other important information on the topic.
DANGER! Before opening it, the multimeter must be isolated or disconnected from the
dangerous active voltage. There is a risk of an electric shock!
DANGER! This symbol warns against dangerous electrical voltage!
Electrical devices do not belong in the hands of children. Persons with disabilities should also
only use electrical devices within the scope of their abilities. Never allow children or persons
with disabilities to use electrical devices unsupervised. They may not recognise potential risks.
Batteries and small parts may cause choking resulting in death or serious injury. Store the battery
in a safe place. If a battery is swallowed, seek medical help immediately. Always keep plastic
packaging out of reach. It poses a suffocation risk!
Resolution
0.1Ω
1Ω
10Ω
0.1kΩ
1kΩ
10kΩ
Voltage
approx. 3V peak-to-peak
POWERFIX PDM 300 B1
Precision
± (1.0%+5)
± (0.8%+3)
± (1.2%+3)
Output impedance
approx. 10kOhm
English - 53