Publicidad
Idiomas disponibles
Idiomas disponibles
I_
Install
Side Shelf
Frame
to Firebox
[]
Unscrew
the 2 Phillips Head Bolts 1/4 inch from the upper left and right
corner holes in the right
side of
the firebox
as shown in Inset 1. The bolts extending
out of the firebox
sides are to attach the Side Shelf
Frame.
[]
Slide the upper holes of the Side Shelf Frame over the heads of the 2 Phillips Head Bolts and drop down.
[]
Use 2 Phillips Head Bolts (lVl6xl6mm)
to attach the lower holes in the Side Shelf Frame to the firebox
as
shown
in Inset 2.
[]
Use 1 Phillips Head Bolt (IVl4x8mm)
to attach the lower hole in the Side Shelf Control Panel to the firebox.
See Inset 3.
[]
Tighten
the 2 previously
loosened
Phillips
Head bolts.
Phillips
Head Bolt M6xl6mm
Qty: 2
Phillips
Head Bolt M4x8mm
Qty: 3
|
Inset
1
Inset
3
Inset
2
Publicidad
