Safety Information; Ll. General Information; Lll. Package Contents; Accessories Installation - WEG Anybus-CC Guía De Instalación, Configuración Y Operación

Installation, Configuration and Operation Guide
I. SAFETY INFORMATION
All safety procedures described in the manual should be followed.

ll. GENERAL INFORMATION

This is a guide for the installation, configuration and operation of the Anybus-CC
accessories. These modules make different interfaces/protocols available for following
products:
- CFW-11
- CTW900
- SSW7000

lll. PACKAGE CONTENTS

- Accessory module in anti-static packaging.
- Installation, configuration and operation guide.
- torx screwdriver.

1. ACCESSORIES INSTALLATION

The following figures illustrate the installation steps of the module on a CFW-11
frame size A but the procedure is similar for the other frame sizes and products.
The accessories are installed directly into slot on the control module.
Anybus-CC Accessory Module
Figure 1: Accessory slot identification
- slot1: white
- slot2: yellow
- slot3: green
- slot4: Anybus
1