Safety Information; General Information; Package Contents; Module Installation - WEG CFW-11 Guía De Instalación, Configuración Y Operación

Installation, Configuration and Operation Guide
Temperature Transducers Module IOE
l. SAFETY INFORMATION
All safety procedures described in the manual must be followed.
ll. GENERAL INFORMATION
This user guide provides information for installation, configuration and operation
of the optional modules IOE-01, IOE-02 and IOE-03.
These modules are used to connect temperature sensors of the type PTC (IOE-01),
PTC100 (IOE-02) and KTY84 (IOE-03).
NOTE!
The IOE-0x accessories can be used only with CFW-11 inverters that have
software version V2.00 or higher.
lll. PACKAGE CONTENTS
- Accessory module in anti-static packaging.
- Installation, configuration and operation guide.
- Fixing screw.

1. MODULE INSTALLATION

The optional board modules are installed directly into slots on the CFW-11 control
module.
Figure 1 - Identification of slots of the optional modules
- slot 1: white
- slot 2: yellow
- slot 3: green
5