18
78. Position the lightbar (4) and connect the liftgate re
lease cable (3) to the lightbar (4).
NOTE: Use the vehicle license lamp connector and not
the one on the backup camera harness.
79. Connect the electrical connectors (1, 2) to the backup
camera, lights and switch if equipped.
80. Install the lightbar (2) to the liftgate.
81. Install the lightbar retaining screws (1) to the liftgate.
82. Seat the liftgate harness grommet (1) on the liftgate
and the body.
Feb 02, 2011
www.mopar.com
K6861161