30. Remove the rear seat back mounting fasteners (1, 2).
31. Remove the seat back from the vehicle.
32. Remove the rear header trim panel (1) by carefully
pulling down on the trim to disengage the retainers.
33. Remove the Dpillar trim access hole covers and re
move the mounting fasteners.
34. Using trim stick C4755, carefully pry the Dpillar trim
(2) out disengaging the retaining clips.
35. Remove the Dpillar trim (2) from the vehicle.
Feb 02, 2011
www.mopar.com
7
K6861161