Carel MasterAria CTEM70000 Serie Hoja De Instrucciones página 24

6. ELECTRICAL PANEL TECHNICAL SPECIFICATIONS
Power supply:
Three-phase model
Single-phase model
Switching power
Insulation guaranteed by the power supply:
For both the models:
Connections:
Panel power supply
Contactor connection
Terminal connection
Motor protector connection
Probes
Digital inputs
LCD panel - tLAN communication
Serial communication boards
Power supply
Power outputs (relays)
Plastic case:
Assembly:
Operating conditions:
Storage conditions:
Front panel index of protection:
Environmental pollution:
PTI of the insulating materials:
Period of stress:
Category of resistance to fire:
Class of protection against voltage surges:
Type of action and disconnection:
Classification according to protection against electric shock:
Device designed to he hand-held or integrated into equipment
designed to be hand-held:
Cleaning the front panel of the instrument:
7. DIMENSIONS
CAREL reserves the right to make any modifications or changes to its products without prior warning
Code +050001260 – Rel. 2.0 – 22/01/08
Voltage: 400 V~, 50/60 Hz; Power: 4 kW
Voltage: 230 V~, 50/60 Hz; Power: 1.5 kW
10 kA
Insulation from very low voltage parts: reinforced, 6 mm in air, 8 mm on surface, 3750 V
insulation.
Insulation from relay outputs: main, 3 mm in air, 4 mm on surface, 1250 V insulation.
0.75 to 10 mm²
0.75 to 2.5 mm²
0.2 to 4 mm²
1 to 25 mm²
Up to 10 m max
30 m (AWG 14-22)
30 m (AWG 14-22)
see the corresponding paragraph
5 m (AWG 14-22)
30 m (AWG 14-22)
Dimensions 200 x 240 x 87 mm;
wall-mounting (with plastic case): by fastening screw (spacing 162.5 x 218.5); panel
assembly (with plastic faceplate): by fastening screw (spacing 159.5 x197.5); open board:
main board by fastening screw and front board by fastening screw. The controller must
be protected against accidental contact to avoid electric shock.
With plastic case = -10T50°C; <90% RH non-condensing
-20T80 °C, humidity 80% RH non-condensing
With plastic container: IP54;
2 (normal).
Printed circuits 250, plastic and insulating materials 175.
Electrical stress across the insulating parts: long.
Category D and category B (UL 94-V0).
Category 2.
1B relay contacts (microswitching).
Class 2 when suitably integrated.
No
Only use neutral detergents and water.
Fig. 7.a
24
MasterAria