Language Setting; View Version Information - Silverline 913738 Manual Del Usuario

GB
• Press OK (11) to enter SYSTEM SETTING, or navigate to the
other options
System Setting

Language setting

• Select then the flag of the language you require
Selecting video system
• Select then the video system required, NTSC or PAL
Note: NTSC is generally used in the Americas and Japan, PAL
in Europe and the rest of the world
Formatting an Micro SD card
• Select then confirm selection <YES> or <NO>
Note: formatting a card will erase all data on the card
Restore default settings
• This restores the system to its default settings and deletes
any changes that may have been made
• Select then confirm selection <YES> or <NO>

View version information

• Select to view the firmware version number
Date and Time
Buttons (18 & 19) and OK Button (11) to
• Use the and
set the date and time
Recorder Setting
• Frame rate enables you to set a frame rate, from 5 to 30
frames per second, in 5 second increments
• Time stamp enables you to add a time stamp to the video
Event Playback
• In system setting mode you can use the same methods as
described earlier for viewing and/or deleting images or video
Maintenance
• Ensure all parts are clean and dry before storage
• Clean with care, using a damp cloth or similar if needed
• Do not immerse any part in water and do not use abrasive
cleaning materials
Storage
• Store the product and all accessories in the case supplied, in
a dry environment out of the reach of children
• If storing for an extended period, it is recommended that
you remove the batteries to prevent possible leakage and
damage to the unit
Disposal
• Do not dispose of power tools, or other waste electrical and
electronic equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on
the correct way to dispose of power tools
8