Frigidaire CFRE4120SW Manual De Uso página 16

REVERSING DOOR
5 Remove the striker plate and the latch plate from the front
panel.
6 Reinstall each plate in the opposite position with the same
screws removed in previous step.
16
7 Grasping fi rmly the top of the door, position the door
near the door opening and align the top hinge hole to
the top hole in the front panel door opening. Attach the
upper hinge to the front panel with one screw. Once the
fi rst screw is started, attach the second screw to the
lower hinge. Once both screws are tightened, install the
remaining two screws.
8 Close the door and test operation of hinge, strike and
latch.
FRONT PANEL
HINGE SCREWS (x 4)