Power On / Off - Sanyo PID-42NE1 Instrucciones De Instalación

Power On / Off

Connecting the AC cord plug to the Display.
Connecting the plug to the Wall Outlet
Notes:
• Main plug types vary between countries. The power
plug shown at right may, therefore, not be the type
fitted to your set.
• When disconnecting the AC cord, be absolutely
sure to disconnect the AC cord plug at the socket
outlet first.
Press the Power switch on the Display to turn the
set on: Power-On.
Power Indicator: Green
Press the
Power Indicator: Red (standby)
Press the
Power Indicator: Green
Turn the power to the Display off by pressing the
the Display is on or in standby mode.
Note:
During operation of the power management function, the power indicator turns
orange in the power off state.
Announcement
The main unit radiates heat and some of the parts may become hot. This is not a problem for performance
or quality. Set up in a location with good ventilation. Do not cover the ventilation holes of the Display with a
tablecloth, etc., and do not place on top of other equipment.
button on the remote control to turn the Display off.
button on the remote control to turn the Display on.
Remote Control Sensor
Power Indicator
switch on the unit, when
Power switch
13