Special Instructions; For Future Reference - Brentwood Appliances TS-117S Instrucciones De Operación Y Seguridad

• Do not operate the appliance if it has a damaged power cord or plug, if wires are
exposed, if it malfunctions, if it is dropped or damaged, or if the motor housing is
dropped in or exposed to water.
• Do not attempt to examine or repair this appliance yourself. Only qualified service
personnel should perform any servicing. Take the appliance to the appliance repair
shop of your choice for inspection and repair.
• Do not overload wall outlet, extension cords, or integral convenience holders, as
this can result in a fire or electric shock.
• Do not put any stress on the power cord where it connects to the appliance, as the
power cord could fray and break.

SPECIAL INSTRUCTIONS:

A short power supply cord is provided to reduce the risk of becoming entangled in or
tripping over a longer cord. An extension cord is not recommended for use with this
appliance, but if one must be used:
• The marked electrical rating must be at least as great as that of the appliance.
• If the appliance is of a 3-prong grounding type, the extension cord must be a
grounding-type 3-wire cord.
• Arrange the extension cord so that it will not drape over the countertop or tabletop
where it can be tripped over or pulled.
WARNING: This appliance is equipped with a polarized plug (one
blade is wider than the other blade) to reduce the risk of electrical
shock. This is a safety feature. The plug will fit into a polarized
outlet only one way. If you are unable to insert the plug into the
electrical outlet, try reversing the plug. If the plug still does not fit, contact a qualified
electrician. Never use the plug with an extension cord unless you can fully insert the
plug into the extension cord. Do not alter the plug. Do not attempt to defeat the
safety purpose of the polarized plug.
Before First Use
IMPORTANT: Please check all packaging material carefully before discarding as there
may be accessory parts contained within the packaging material.
Note: Before your first use, wash the pot and lid using warm soapy water. Rinse
thoroughly. Then fill the kettle with water up to the MAX level. Turn off your appliance
when the water starts boiling and pour the contents out. Dry before reassembling the
coffee maker.
SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

3