Parts:
Lid
Stainless Steel
Pot
Using Your Turkish Coffee Maker:
WARNING: Hot surfaces.
1. Place the power base on a clean, flat surface.
2. When filling with water, remove your appliance from its power base.
3. According to the number of cups of coffee (for 3-4 persons, max-200 ml.), put a
sufficient quantity of cold water, Turkish coffee and sugar into your Turkish
Coffee Maker.
4. Place the appliance onto the power base and move the switch to ON "O".
5. During the operation time, mix your coffee continuously. You can use a metal
spoon when you are mixing.
6. When the coffee starts to bloat out, turn off the appliance and pour a little coffee
into the cups (for foam).
7. Place your appliance back onto the power base unit and restart the coffee maker;
then pour the coffee into the cups.
NOTE: When there is no water in the coffee pot or if the water runs out during use,
the boil-dry protection automatically switches off the heating element. Should this
happen, turn the power switch off, unplug the unit and allow it to cool before
continue using or storing.
Concealed Heating
Element
Power Base
4
On/Off Switch