La Crosse Technology WS-8120U Guía De Configuración Rápida página 4

Continue to section titled "Setup After Changing/Installing the
6.
Battery in the Solar Clock "
TO INSTALL / REPLACE BATTERY
The included alkaline rechargeable batteries should provide you with
many years of service. If your batteries need to be replaced, we suggest
you use 2 fully charged the AA Alkaline.
Rechargeable batteries should be fully charged before inserting into clock.
Alkaline rechargeable batteries must be used.
If you choose to use non-rechargeable batteries, the battery switch MUST
be moved to the BATTERY position (not the SOLAR position). In this
position, the solar cells do not charge the batteries.
REGARDLESS OF THE TYPE OF BATTERIES INSTALLED, THE
BATTERY SWITCH MUST BE IN THE BATTERY POSITION WHEN
THE BATTERIES ARE INSERTED.
If rechargeable batteries are used, the Battery switch should be moved to
the SOLAR position AFTER it is has been inserted.
To use non-rechargeable alkaline batteries:
1. Remove the included rechargeable AA batteries from the
compartment.
2. Use the switch to select the alkaline battery (see below).
3. Insert the batteries into the compartment, observing the correct
polarity (see marking inside battery compartment.
4. Replace battery cover
Note: For best performance, batteries should be replaced at least once
every 2 years to maintain the best running accuracy. Ensure that the
batteries used are new and the correct size.
Battery
compartment
cover
4
Use switch to
select which type
of battery will be
used before
inserting the
battery into the
compartment