Using Pi Seek; Using Auto Pi Seek For Preset Stations; Limiting Stations To Regional Programming; Receiving Traffic Announcements - Pioneer KEH-P2030R Manual De Operación

RDS
Notes
! Only RDS stations are tuned in during seek
tuning or BSM when AF is on.
! When you recall a preset station, the tuner
may update the preset station with a new fre
quency from the stations AF list. (This is only
available when using presets on the F1 band.)
No preset number appears on the display if
the RDS data for the station received differs
from that for the originally stored station.
! Sound may be temporarily interrupted by an
other program during a AF frequency search.
! When the tuner is tuned to a non RDS station
the AF indicator flashes.
! AF can be turned on or off independently for
each FM band.

Using PI Seek

If the unit fails to find a suitable alternative fre
quency, or if you are listening to a broadcast
and the reception becomes weak, the unit will
automatically search for a different station
with the same programming. During the
search, PI SEEK is displayed and the output is
muted. The muting is discontinued after com
pletion of the PI Seek, whether or not a differ
ent station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the unit can
be set to perform PI Seek during preset recall.
! The default setting for Auto PI Seek is off.
See Switching Auto PI Seek on page 18.
Limiting stations to regional
programming
When AF is used to automatically retune fre
quencies, the regional function limits the se
HHHHHHHHHHHHHH
lection to stations broadcasting regional
programs.
% Press DISP/REG and hold until the regio-
nal function turns on or off.
Notes
! Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
! The preset number may disappear on the dis
play if the tuner tunes in a regional station
which differs from the originally set station.
! The regional function can be turned on or off
independently for each FM band.
Receiving traffic
announcements
TA (traffic announcement standby) lets you re
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross references
TP stations).
1 Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a TP or enhanced
other networks TP station the TP indicator will
light.
2 Press TA/AF to turn traffic announce-
ment standby on.
Press TA/AF and the TA indicator appears in
the display. The tuner will standby for traffic
announcements.
# To turn traffic announcements standby off,
press TA/AF again.
Black plate (11,1)
<CZR2959-A>11
Section
05
11
En