Tripp-Lite SRCOOL12K El Manual Del Propietario página 6

Ocultar thumbs Ver también para SRCOOL12K:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation
Connect the flexible cooling duct (shorter tube
2-3
the duct with the circular adapter opening, push the duct downward and turn the duct
clockwise until it screws into the adapter solidly.
Place the other end of the cooling duct near the air intake of the target device or rack
2-4
enclosure, using the straightest, shortest path available. If you plan to cool a rack
enclosure, place the end of the cooling duct over a perforated area near the top of the
enclosure's front door (or near the top of the bank of equipment that requires cooling).
Cool air will sink and spread across the air intakes at the front of the rack enclosure.
Exhaust Duct Connection
3
Connect the flexible exhaust duct (longer tube
3-1
panel of the unit
B
. Align the duct with the circular vent opening, push the duct inward
and turn the duct clockwise until it screws into the exhaust vent solidly.
Connect the other end of the exhaust duct
3-2
duct with the circular adapter opening, push the duct inward and turn the duct clockwise
until it screws into the adapter solidly.
If you plan to connect the exhaust duct to a drop ceiling, proceed to step
connect the exhaust duct to a window, proceed to step
A
) to the cooling duct adapter
A
) to the warm air exhaust vent on the rear
A
to the exhaust duct adapter
4
5
.
6
B
. Align
A
2-3
2-4
A
3-1
B
. Align the
. If you plan to
B
3-2
B
B
A

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Srxcool12kSrxcool12kaSrxcool12kbAg-0073Ag-00a0Ag-0533

Tabla de contenido