Incorrect Use; General Description - Gammapiu DONNA + Manual De Uso

when not in use.
• Place the product on a flat, stable surface, away from sources of heat.
• Noise: The sound pressure level (A-weighted) is less than 70 dB (A).
GENERAL USE WARNINGS
USE
The straightener is designed for straightening and styling human hair.

INCORRECT USE:

Use this appliance only for its intended purpose, do not use with
wigs, animal fur or with any material other than human hair.
The manufacturer declines all liability concerning misuse of the
appliance.
Warning: danger of burning - do not touch the heating elements
during use.
Do not wrap the power cord around the appliance so as to prevent
damaging the cord itself and prevent any secondary risk.
Refer to the outer packaging and the specifications on the data plate affixed to the
product itself for the relevant technical specifications.
• Make sure that the mains voltage matches the one shown on the technical data
plate of the appliance.
• Keep out of reach of children. Children must not play with the appliance.
• This appliance can be used by children starting from the age of 8 and by people
with reduced physical, sensory or mental capabilities, or by people lacking the
experience or knowledge, as long as they are properly supervised and instructed
on the use of the appliance and are involved in the comprehension of the dangers.
• Cleaning and maintenance must not be performed by children without
supervision.
• To guarantee the proper and safe functioning, should the device fall or impact
violently, have it checked at an authorised customer service centre.
• Do not leave handkerchiefs or similar objects near the appliance.
• The power cord must never come into contact with the appliance.
USE
This appliance is designed for professional use in commercial areas.

GENERAL DESCRIPTION

Hair straightener with heating elements equipped with key for switching on/off and
for operation temperature selection (if provided), with relative LED lights.
A
A – Heating plates
B – On/off and temperature selection key
C – Coloured LEDs
D – Power cord
SWITCHING ON AND USE
Connect the power cord [D] to the mains socket in accordance with the safety
warnings described previously.
Press the [B] key for about 1 second. The plate will beep to indicate that it has turned
on (only for the version with temperature adjustment).
Only for the version with temperature adjustment
Select the desired temperature by pressing [B]. The LED [C] corresponding to the
selected temperature will light up.
8
A
C B
D