Corsair HS70 Manual Del Usuario página 2

IMPORTANT SAFETY INFORMATION
CORSAIR HS WIRELESS Gaming Headset Safety Leaflet
Product name and model: Wireless Headset/RDA0016
Product name and model: USB Dongle/RDA0017
1. Read these instructions.
2. Keep these instructions.
3. For how to operate and use the product please refer to our
Quick Start Guide.
4. Heed all warnings.
5. Follow all instructions.
6. Do not use this apparatus near water.
7. Clean only with dry cloth.
8. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
9. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
10. Only use attachments/accessories specified by the manufacturer.
11. Unplug this apparatus during lightning storms or when unused for
long periods of time.
12. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
13. The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed
on the apparatus.
14. Warning: to reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
15. Caution: these servicing instructions are for use by qualified personnel
only. To reduce the risk of electric shock do not perform any servicing
other than that contained in the operating instructions unless you are
qualified to do so.
16. Where the mains plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily operable.
BATTERY SAFETY
For products which use a Lithium-Ion Polymer Battery (LIPB):
Precautions must be followed in the event that the headset is
disassembled for disposal, recycling, refurbishment, or repair.
1. Do not drop, hit, or bend the battery.
2. Electrical short circuiting of battery terminals is strictly prohibited, as
it may damage the battery cell.
Prohibition of disassembly
3. Never disassemble the battery cell.
4. Disassembling of the battery cell might cause an internal short circuit
in the battery cell, which may cause gassing, explosion, or other
dangerous conditions.
5. Battery electrolyte is harmful.
6. LIPB should not have liquid from electrolyte flowing, but in case the
electrolyte comes into contact with the skin or eyes, seek medical
help. Physicians shall flush the electrolyte immediately with fresh
water and medical advice is to be sought.
Prohibition of dumping of cells into fire
7. Never incinerate nor dispose the cells in fire. These may cause
explosion of the cells, which is very dangerous and is prohibited.
Prohibition of cells immersion into liquid such as water
8. The cells shall never be soaked with liquids such as water, seawater,
drinks such as soft drinks, juices, coffee or others.
Prohibition to use damaged cells
9. Cells might be damaged during shipping by shock. If any abnormal
features are found, such as damages in a plastic envelop of the
cell, deformation of the cell package, smelling of an electrolyte, an
electrolyte leakage and others, the cells must not be used.
10. Cells with an electrolyte smell or a leakage shall be placed away from
fire to avoid firing or explosion.
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
CORSAIR HS WIRELESS GAMING HEADSET:
For Recycling and Disposal, first remove the battery according to the
following diagram:
1 2 3
4 5 6
Always dispose of used battery according to local regulations.
NOTE ON ENVIRONMENTAL PROTECTION
After the implementation of the European Directive 2012/19/EU
in the national legal system, the following applies:
— Electrical and electronic devices may not be disposed of
with domestic waste.
— Consumers are obligated by law to return electrical and electronic
devices at the end of their service lives to the public collecting points
set up for this purpose of point of sale. Details to this are defined by the
national law of the respective country. This symbol on the product, the
instruction manual or the package indicates that a product is subject
to these regulations.By recycling, reusing the materials or other forms
of utilizing old devices, you are making an important contribution to
protecting our environment.
FCC — UNITED STATES AND CANADA
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device must not be co-located or operating in conjunction with any
other antenna or transmitter. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID 2AAFMRDA0017 (Dongle)
FCC ID 2AAFMRDA0016 (Headset)
CAUTION!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
FREQUENCY BAND 2403.35MHz---2477.35MHz
TRANSMIT POWER EIRP
<10dBm
CANADA (IC) STATEMENTS
This device complies with Industry Canada license-exempt
RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device.
IC 10954A-RDA0017 (Dongle)
IC 10954A-RDA0016 (Headset)
This equipment complies with IC RSS-102 radiation exposure limit set
forth for an uncontrolled environment.
THE AUTHORIZED REPRESENTATIVE IN EUROPE:
CORSAIR MEMORY, BV
Wormerweg 8, 1311 XB, Almere, Netherlands
COMPLIANCE
CORSAIR MEMORY, Inc. declares that this radio
equipment model "RDA0016" and "RDA0017"
are in compliance with Directive 2014/53/EU and
Directive 2011/65/EU. The full text of the
EU declaration of conformity can be obtained at
regulatory@corsair.com.
PREVENTION OF HEARING LOSS
To prevent possible hearing damage,
do not listen at high volume levels for long periods.
IMPORTANT
Read and understand all instructions before you use your CORSAIR
audio product. If damage is caused by failure to follow instructions,
the warranty does not apply.
SAFETY
Risk of electric shock or fire!
• Never expose the product and/or accessories to rain or water. Never
place liquid containers, such as vases, near the product. If liquids
are spilt on or into the product, disconnect it from the power socket
immediately. Contact CORSAIR Customer Service to have the product
checked before use.
• Never place the product near naked flames or other heat sources,
including direct sunlight.
• Never insert objects into openings on the product.
• Where the mains plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily operable.
• Disconnect the product from the power socket before/during
lighting storms.
• When you disconnect the power cord, always grip the plug,
never the cord.
Risk of short circuit or fire!
• Before you connect the product to a power socket, ensure that the
power voltage matches the value printed on the back or bottom of the
product. Never connect the product to a power socket if the voltage
is different.
• Never place the product or any objects on power cords or on other
electrical equipment.
• If the product is transported in temperatures below 5 degrees
Celsius,unpack the product and wait until its temperature matches
room temperature before connecting in to a power socket.
Risk of overheating!
• Never install this product in a confined space. Always leave a space of
at least four inches around the product for ventilation. Ensure curtains
or other objects never cover the product.