Procopi Calypso Instrucciones De Instalación página 18

5
Slide small protective sleeves onto the straps.
Hook the rings at the tips of the storage side tension straps onto
their respective pegs. Shackle screws should be tightened to torque
by an adult to ensure that they could not be loosened by a child.
Adjust the bar tension strap buckles to ensure that the bar is parallel
to the pool wall.
T
HE REST OF THE INSTALLATION PROCEDURE WILL TAKE PLACE
ON THE OPPOSITE SIDE OF THE POOL
7
- Slide a large protective sleeve onto each cable tension strap (7).
- Use the ratchet buckles to tension each cable (do not over tension, this could twist the peg with bushing).
- Hook the bar tension straps onto their respective pegs and tension. Apply the same tension to each of the three straps.
Over-tensioning the bar tension straps can lead to the permanent deformation of the bar to which it is attached.
- Cover the ratchet buckles and cam buckles with the protective sleeves (8).
POOLS FEATURING ROMAN STAIRS OR STRAIGHT STAIRS AT THE END OF THE POOL
9
cover
Couverture
C
10 cm
A
axe du bassin
S
LIDE THE STAIR EXTENSION WITH RESPECT TO THE COVER UNTIL IT IS PERFECTLY POSITIONED
Follow the diagram illustrated above for pools featuring straight stairs or roman stairs.
A = peg position for attachment of bar tension straps.
C = Fixkit peg position. If the stair extension measures less than 1.40 m, no Fixkit will be placed in the middle. Above
this measurement, other Fixkits will need to be positioned at regular intervals. The distance separating two Fixkits
should be between 50 and 70 cm.
.
C
milieu de l'extension
30 cm
10 cm
A
A
pool axis
6
cover
Couverture
50 cm
A
B
20 cm
On the opposite side, mark the position of the 5 pegs as
described previously. This time, the pegs holding the cables
will be furthest from the pool edge (refer to the diagram
above).
A = peg position for attachment of bar tension strap.
B = peg position for attachment of cable tension strap.
Drill holes and insert the pegs with bushings as laid out in
step 4. Hook the straps on as described in step 5.
8
10
18/48
2006/11 - Version: I - Code : 0033860
80 cm
A
pool axis
axe du bassin
.
A
B
20 cm