1
INDEX
1.1
IDENTIFICATION DATA
1.2
WARRANTEE
2.
STORAGE
3.
WARNINGS
4.
TECHNICAL DATA
5
OPERATION
6
ELECTRICAL INSTALLATION
7
REFERENCES AND CONNECTION TERMINALS
7.1
REFERENCES AND CONNECTIONS FOR SYSTEMS WITH A HERTZ ONE
7.1.1
REFERENCES AND CONNECTIONS FOR SYSTEMS WITH A HERTZ ONE
1x1,5T, 1x3T MOTORS TRIAGLE CONNECTED
7.1.2
REFERENCES AND CONNECTIONS FOR SYSTEMS WITH HERTZ ONE 1.5T,
HERTZ ONE 3T FOR TRIANGLE CONNECTED THREE PHASE MOTORS.
8
CONTROL BUTTONS AND SIGNAL LIGHTS
8.1
SYNOPTIC CONTROL PANEL
9
SYSTEM START-UP
9.1
TABLE OF PARAMETERS DISPLAYED WITHOUT PASSWORD
9.1.1
HERTZ ONE PARAMETER SETTINGS TABLE
9.2
OPERATIONAL CONTROL
9.3
ALARM CODES TABLE
10
SPARE PARTS
11
CONFORMITY DECLARATION
1.1
IDENTIFICATION DATA
Manufacturer: EBARA PUMPS EUROPE S.p.A.
FACTORY ADDRESS
Via Pacinotti, 32
36040 Brendola (VI) ITALY
Telephone: 0444/706811
Fax: 0444/706950
TELEX: 480536
Web site:
1.2
WARRANTY
FAILURE TO COMPLY WITH THE INSTRUCTIONS PROVIDED IN THIS INSTRUCTIONS HANDBOOK
AND/OR ANY SERVICING OF THE HERTZ ONE WHICH IS NOT PERFORMED BY OUR SERVICE
CENTRES WILL RESULT IN INVALIDATION OF THE WARRANTY AND WILL RELIEVE THE
MANUFACTURER FROM ANY LIABILITY IN THE EVENT OF PERSONAL INJURIES OR DAMAGE TO
PROPERTY OR THE HERTZ ONE ITSELF.
2.
STORAGE
A long inactive storage period in unstable conditions may cause damage to the equipment making them hazardous to those
performing the installation, controls and maintenance.
It is good practice to provide proper storage for the HERTZ ONE in compliance with the following
instructions:
− it must be stored in a perfectly dry location, away from any heat sources.
it must be perfectly sealed and isolated from the external environment, in order to prevent infiltration of moisture and
−
dust which could damage the electrical components thereby compromising its correct operation.
www.ebaraeurope.com
ENGLISH
LEGAL ADDRESS
Via Campo Sportivo,30
38023 CLES (TN) ITALY
Telephone: 0463/660411
Fax:
16
page
16
16
16
16
17
17
18
18
19
20
21
22
23
24
25
25
26
27
28
29
72
0463/422782