Panacom BB-2000 Manual Del Usuario página 6

- the player will start reading the storage media automatically after connecting,
the LCD display will show a total number of MP3 files being detected. Press
PLAY button to start USB or Cards playback status (the player can play
automatically after few seconds). The LCD will show "USB" or "CARD" and
MP3 (format)
- Press STOP button to stop playback of the files of the USB or Card and then
take the USB pen or SD Card out from the USB port or Card slot.
Remark
- The system can detect and read files under MP3 format only.
- If connecting the system to Mp3 player via USB socket, due to variance in
Mp3 encoding format, some MP3 players may not be able to play via USB
socket. This is not a malfunction of the system.
- USB port does not support connection with USB extension cable and is not
designed for communication with a computer directly.
SPECIFICATIONS:
Power: DC 9V 1A
Output power: RMS 1.5Wx2
Impedance: 4ohm
Frequency range: FM 87.5-108 MHz
Working temperature: -10 / 45
Battery: Li-ion 3.7V 800mAh
Recharge time: 4-5 hours
Working time: 1-2 hours
Unit dimension: L156 x W149 x H84mm
Weight: about 1.42 KG
Note:
Specifications are subject to change for continuous improvement without prior
notice.
o
C