Jabra PRO 9460 Guia De Inicio Rapido página 5

A setup wizard automatically launches on the
touchscreen.
Congratulations on your
new jabra PRO 9400!
English
This guide will help you
assemble and configure
your headset solution.
Italian
Norwegian
step 4: Connect the base to your desk phone
Let the wizard guide you through the task of
connecting your desk phone to the base.
The way in which you connect the two devices will
vary according to whether the phone has a headset
port and whether it has an electronic hook-switch or
remote handset lifter (such as the GN1000).
You need to determine this yourself. For example, you
might already have an electronic hook-switch (EHS)
installed or you might have ordered a remote handset
lifter (such as the GN1000) together with your headset
package. You can use the wizard to configure your EHS
connection (if any).
note: Connection to a phone which includes an
electronic hook-switch requires a model-specific
adapter from Jabra. See the user manual for more.
step 5: Configure the base for your desk phone
Once the base has established a connection to the
desk phone, the optimal clear dial-tone switch and
microphone level settings need to be determined.
DESK PHONE
SETUP
Connect to a desk
phone
Yes
No
3 Sec.
US
The wizard will prompt you to call your local
Jabra setup server — see the cover of this
quick start guide for a list of numbers. This
enables the Jabra PRO base to test its clear
dial-tone switch and mic.-level settings by
exchanging signals with the setup server.
note: If the base is unable to contact the server,
you can choose to configure the desk phone
manually. See the user manual for more.
To set the clear dial-tone switch position and mic.-
level:
1. Open the panel on the front-right of the Jabra PRO
base by slipping your thumbnail under the bottom
edge of the panel and pulling forward and up. This
reveals the clear dial-tone switch.
2. The touchscreen wizard prompts you to call
the Jabra setup server. Follow the on-screen
instructions.
3. The wizard prompts you to select positions (A – G)
manually on the base's clear dial-tone switch. The
base itself will determine which of these is the best.
Once it has established the optimal clear dial-tone
switch position, the base will determine the
optimal microphone level automatically.
step 6: Connect the base to your softphone (PC)
To use Jabra PRO with a softphone, you must first
connect the Jabra PRO base to your PC via a USB
cable. The softphone part of the setup wizard will
prompt you to do this.
1. Connect the small connector (mini USB) of the
supplied USB cable to the port marked
Jabra PRO base.
on the