Finishing The Installation - THD RH5H1-ORB Guía De Uso Y Cuidado

Installation (continued)
4

Finishing the installation

□ Match the three holes at two ends of the supporting bar (A)
with three screws of the hanger. Secure the fan assembly
onto the supporting bar (A) using the preassembled screws
(1) and washers (2) (Figure 7 and 8).
□ Fix the motor housing (B) onto the supporting bar (A) by
tightening the four screws (3) preassembled to the motor
housing (B) (Figure 9).
□ Attach the fan pull chain pendant to the pull chain on the
switch assembly.
THD_RH5H1_UD42.eg
Figure 7
1
2
A
1
2
7
A
Figure 8
3
B
Figure 9
18年11月07日 下午15:20