Hilti SF 2H-A Manual De Instrucciones Original página 16

5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and
that the switch safety lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts in the drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop
out and fall, thereby presenting a hazard to other persons.
▶ Fit the battery and make sure that it is heard to engage.
5.2 Fitting the belt hook (optional)
WARNING
Risk of injury. A falling power tool may present a risk of injury to yourself
and others.
▶ Check that the belt hook is fitted securely before beginning work.
The belt hook allows the power tool to be attached to a belt worn by
the operator. The belt hook can be fitted to allow attachment on the left
or right side of the body.
▶ Fit the belt hook.
5.3 Selecting the function
▶ Select the desired function.
5.4 Setting the torque
▶ Set the desired torque.
The torque is limited only when the power tool is set to screwdriving
mode .
10 English
Printed: 19.06.2019 | Doc-Nr: PUB / 5245424 / 000 / 04
2
3
4
5
2125997
*2125997*