E N
3 Symbols in the Instruction Manual
8
•
To move or lift the DMA 4100/4500/5000, hold the instrument at the front and
rear to prevent squeezing your fingers between the DMA and the table.
When carrying the instrument, keep it close to your body.
•
Follow the precautions below for the handling and measurement of
inflammable samples and cleaning materials:
-
Do not store inflammable material near the instrument.
-
Do not leave sample containers uncovered.
-
Clean all spillages immediately.
-
Ensure that the DMA 4100/4500/5000 is located in a sufficiently ventilated
area, free from inflammable gases and vapors.
-
Connect the DMA 4100/4500/5000 to mains power via a safety switch
located a safe distance from the instrument. In an emergency, turn off the
power using this switch. Do not use the DMA 4100/4500/5000 power
switch.
-
Keep a fire extinguisher at hand.
-
Do not leave the DMA 4100/4500/5000 unattended while in use.
Do not touch areas marked with this symbol (yellow) when the power
is turned on.
3 Symbols in the Instruction Manual
The following symbols are used in the instruction manual:
Important:
The "Important" sign indicates a hazard to the equipment.
It calls attention to an operating procedure, practice, etc. which, if not correctly
performed or adhered to, could result in damage or destruction of the
instrument or parts of it.
Do not proceed beyond an "Important" sign until the indicated conditions are
fully understood and met.
Hint:
The "Hint" sign calls attention to any additional information which might be
of use to the operator.
XDLIB28