Frequently Asked Questions - Avantree BTHS-063 Manual De Usuario

Charging
If you start to hear a "beep" sound every minute, it's an indication that the battery
level is low. To charge the headphone, connect it to a power source using the USB
cable we provided. Either a USB wall charger (DC 5V / 0.5-2A) or a powered com-
puter USB port would work. The LED indicator on the headphones will remain
RED while charging and will turn o when charging is complete.
Clear the headphones pairing history
If you have issues with the audio stream skipping or cutting out when using
Avantree HS063, please try to clear pairing history as following:
Turn on the headphones (Non-calling Status), press and hold BOTH "+" and "-"
simultaneously for 5 seconds until the LED indicator blinks Blue and RED. The
headphone will then enter pairing mode automatically.

Frequently Asked Questions

No sound with PC?
• Set Avantree HS063 as the default device or output device on the PC.
• When using HS063 to make VOIP calls through apps, please set HS063
Hands-Free as Microphone and Speakers device.
No sound with Bluetooth transmitter?
• Ensure Bluetooth transmitter and headphones are connected properly.
• Check if the audio source is functioning properly
- AUX & RCA output on TV – test with wired headphones
- OPT output on TV – Set audio format to "PCM/LPCM" or turn o Dolby/DTS
• Change your TV audio out setting to External speakers / Headset.
Headphones do not pair with Bluetooth device?
• Ensure HS063 is in Pairing mode – LED ashes BLUE and RED alternately.
• For Bluetooth transmitter, ensure the transmitter is in Pairing mode – refer to
its user manual.
• For Smart phone, tablet and PC
- Turn the Bluetooth o and then on again.
- Delete "Avantree HS063" headphones from your device's Bluetooth list
and then try to pair again.
• Clear the headphones pairing history and try to pair again.
on support.avantree.com or contact support@avantree.com directly.
For more detailed information please search "HS063"
EN