Installation - auna 10034060 Manual Del Usuario

Function Identification: Transmitter
1 Charging pins
2 LED indicator of power/signal (green)
3 LED charging indicator (Charging: Red; Charged Green)
4 DC IN
5 3.5mm Audio IN socket

INSTALLATION

Transmitter
1. Connect the power adapter to the DC IN input socket located on the
transmitter rear panel.
2. Connect the power adapter provided to an electrical outlet.
3. Audio Cable and RCA adapter cable, are provided for various type of
connection to your audio source (e.g. TV set, Hi-Fi system, MP3 or iPod
etc.).
The Green Power Indicator LED will blink as soon as you have connected
the power adapter to the electrical outlet. When the audio signal is detected
from the audio source, and the Green LED Indicator will glow constantly.
EN
15