Magnat MCD 1050 Información Importante Sobre La Instalación / Certificado De Garantía página 9

OPeRATIONAl eleMeNTS AND CONNeCTIONS – FRONT PANel
1 Power
Switches the device on when it is in the standby
mode. If the leD (2) does not illuminate,
actuate the power switch located on the rear
of the device. conversely the device can be
switched from power operation to the standby
mode.
3 Sensor for the remote control
Please aim at this sensor when using the
remote control.
4 Display
The following information is indicated in the
display:
• Heating phase of the tubes:
WARM UP / Progress bar
• After a cD has been inserted and read:
• current status (symbol and text)
• Total number of tracks on the cD
• Total playing time of the cD
• current playback information (display mode 1):
• current status (symbol and text)
• current track
• Played time of the current track
• current playback information (display mode 2):
• current status (symbol)
• current track/Number of tracks on the cD
• Played time of the current track
• Time remaining of the current track
• Progress bar which indicates the current
position in the track.
• Interruption of playback by the pause func-
tion:
01/14
0:14 - 6:43
• The set volume of the headphone jack as
soon as the volume control is actuated via
the remote control:
• The currently selected digital audio input:
USB IN / DIGITAl IN OPTICAl / DIGITAl
IN COAXIAl
5 eject
Opens or closes the cD compartment.
6 Play/Pause
Starts or pauses the playback from a cD.
7 Stop
Stops a cD that is playing.
8 Search/Skip
Brief press: Playback starts at the beginning of
the current track.
Two brief presses: Playback starts at the
beginning of the previous track.
Press and hold: High-speed rewind. Remains
active as long as the button is depressed.
9
9 Search/Skip
Brief press: Playback starts at the beginning of
the next track
Press and hold: Fast forward. Remains active
as long as the button is depressed.
10 Headphones
6.3 mm stereo output jack for headphones. The
volume can be adjusted via the remote control.
11 CD compartment
Insert the cD into the compartment with the
label facing upwards.