Replace The Cartridge Filter; Replace The Filter Bag; Replace Dust Bags; Clean The Float Ball - Nederman E Serie Manual De Instrucciones

6.2

Replace the cartridge filter

NOTE!
• If the filter is placed into a dust bag for disposal, tie off the dust bag, see figure 10.
• When using a cartridge filter and filter bag, see figure 11.
1. Turn off vacuum cleaner.
2. Remove the filter and place it into a container or dust bag.
3. Put in the new filter.
6.3

Replace the filter bag

NOTE! If the filter bag is placed into a dust bag for disposal, tie off the dust bag, see
figure 10.
1. Turn off vacuum cleaner.
2. Empty pre-separator, if one is used.
3. Remove filter basket and filter bag.
4. Replace filter bag.
6.4

Replace dust bags

Replace dust bags when they are filled. How often this occurs varies for each installation.
Regular checks are recommended.
Replace dust bags as follows:
1. Turn vacuum cleaner off.
2. Remove (and close) bag opening from bag holder. Pay special attention to avoid
unnecessary spillage/leakage of dust and accidental discharge of static electricity.
3. For bulk-bags:
1) Remove the two earth clamps from the earth tags on the bag.
2) Tie off and replace bulk-bag, see figure 6.
3) Refit the two earth clamps onto the earth tags.
4. Attach the bag opening to the bag holder. For bulk-bags, see figure 6.
5. Turn on vacuum cleaner.
6.5

Clean the float ball

NOTE! To put back the float ball after cleaning, see figure 12.
If the vacuum cleaner is used for wet material, clean the float ball once a month.
6.6

Replace the filter package

NOTE! If the filter package is placed into a dust bag for disposal, tie off the dust bag, see
figure 14.
E - Vacuum Cleaners EN
23