Guidance And Manufacturer's Declaration - Electromagnetic Immunity - Joycare JC-1321 Manual Del Usuario

Table 3
For ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

Guidance and manufacturer's declaration - electromagnetic immunity

The JC-1321 [KD-558] is intended for use in the electromagnetic environment specified below.
The customer or the user of the JC-1321 [KD-558] should assure that it is used in such an
environment.
IEC 60601 test
IMMUNITY test
Radiated RF 3 V/m 80 MHz to
IEC 61000-4-3 2.5 GHz
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected
by absorption and reflection from structures, objects and people.
Compliance
level level
3 V/m
79
Electromagnetic
environment - guidance
Portable and mobile RF
communications equipment should
be used no closer to any part of
the JC-1321 [KD-558], including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distance:
80 MHz to 800 MHz
d 1 2 . P
=
800 MHz to 2,5 GHz
d 2 3 . P
=
Where P is the maximum output
power rating of the transmitter
in watts (W) according to the
transmitter manufacturer and d
is the recommended separation
distance in meters (m).
Field strengths from fixed RF
transmitters, as determined by
an electromagnetic site survey,
should be less than the compliance
level in each frequency range.
Interference may occur in the
vicinity of equipment
marked with the
following symbol:
a
b