Unify OpenScape 35G HFA Manual De Instrucciones página 11

Prepare the Telephone for Installing
Desk Mounting
For desk mounting s lide the stand along the
L-shaped bars on the base of the telephone
until your prefered viewing angle to the te-
lephone is reached.
Four different viewing angles allow you to
personalize your telephone viewing prefe-
rence.
Wall Mounting
For wall mounting you will need a special LAN cable with short
plugs - please contact your administrator for purchase information.
For professional wall mounting we recommend to use the optional
Wall Mount Kit.
1. Break out the tip (1) from the stand.
2. Insert the tip into the telephone's upper handset tray.
3. Position the wall mounting slots (2) on the stand at the desired
place of installation.
4. Drill the holes, insert the dowels and fasten the screws.
5. Affix the stand to both screws.
B
Connect the handset to the telephone
1. Insert the plug on the long
end of the handset cable into
the jack
telephone and press the cable
into the groove provided.
2. Insert the plug on the short
end of the handset cable into
the jack on the handset.
on the base of the
A
11