General Description Of Sensor - STAUFF PPC-CAN-SFM-015 Manual Del Usario

2.

General Description of Sensor

The PPC-CAN-SFM sensor is a flow turbine. The PPC-CAN-SFM flow
turbines provide a total solution for measuring flow at test stations, ma-
chine tools and other applications. The flow meter is installed within the
hydraulic circuit.
Typical applications include production inspections, initial commission-
ing or development testing. Because of its compact design, the flow me-
ter can be installed on-site where space is limited. The flow meter is the
perfect tool for measuring the performance of pumps, motors, valves and
hydrostatic gears. The measured readings can then be transmitted using
the standardized CANopen serial bus protocol.
The PPC-CAN-SFM sensor should only be used for measurements with
the "Stauff PPC-Pad" measuring instrument. The sensor features an LED
which can signal the current sensor status.
NOTICE
Be sure to use the PPC-CAN-SFM sensor only in conjunc-
tion with the Stauff PPC-Pad measuring instrument. This will
ensure that correct measurements are obtained and that the
sensor is not damaged.
29