Device Description; Safety Instructions - STAUFF SPG-DIGI Manual De Instrucciones

1. Device description

The SPG-DIGI / SMB-DIGI, hereinafter referred to as SPG-DIGI, is
used to measure pressure. Dynamic pressure peaks are measured at a
sampling rate of 10 ms (100 measured values/second). The MIN/MAX
memory is continuously updated and overwritten.
Scope of delivery and accessories
Check the scope of delivery and the accessories ordered. If anything is
missing, contact your sales office.
■
SPG-DIGI with adapter SDA-20-G1/4-W3 or
SMB-DIGI without adapter
■
Brief Operating Instructions SPG-DIGI / SMB-DIGI
■
Mini USB cable (data logger version only)

2. Safety instructions

Before working with the SPG-DIGI, read and follow this operating man-
ual. Disregarding the instructions, especially the safety information, can
result in danger to people, the environment, equipment and the system.
The SPG-DIGI corresponds to the current state of the art in terms of
V1.0/01/20
Device description
7