Insert hose in fitting "1" - Fig. 07-02
7.2
MOTOR STARTING SWITCH - SAFETY DEVICES
The motor starting switch:
Can be locked:
Is magneto-thermic: so that it switches off automatically in case of short circuit or overheating; everytime this
occurs, the operator should check that the electric circuit and motor are in order.
Has a release coil:
that automatically switches off in the event of a power cut. This prevents the motor from starting
again all of a sudden when the voltage returns.
NOTE:
In order to comply with specific technical and safety directions, manufacturers supply the motor starting switch with
one voltage only (for instance one-phase 230V, three-phase 230V, three-phase 400V, and so on).
1
when the machine is switched off for maintenance; lock the switch with a padlock to
prevent accidental starting.
07-02
43
GB
SIKA PLUS