Adjusting The Blade Down Feed; Adjusting The Blade Down Feed Speed (Rapid - Operating Down Feed) - FOM INDUSTRIE SIKA PLUS Manual - Uso - Mantenimiento

8.5 ADJUSTING THE BLADE DOWN-FEED - SIKA PLUS AUTOMATIC (Fig. 08-08)
Turning knob "A" clockwise decreases the blade down-feed speed; turning knob "A" counter clockwise increases
the speed.
8.6 ADJUSTING THE BLADE DOWN-FEED SPEED (RAPID - OPERATING DOWN-FEED) - SIKA
PLUS AUTOMATIC (Fig. 08-08)
The machine head has two down-feed speeds:
- rapid
- operating
The former allows a fast approach to the workpiece.
The latter (slower) is suitable for cutting.
Loosen screw "A" and release bar "B" as shown.
When the bar meets the pneumatic microswitch "C", rapid speed turns to operating speed (slow).
NOTE:
"BLADE DOWN FEED SPEED" and "BLADE LUBRICATION FLOW" adjustments are usually set to
standard when machine is tested at the manufacturer's workshop.
C
B
49
A
D
GB
SIKA PLUS
08-08