If the lenses have been disconnected, be careful to note the proper color sequence in order
to avoid incorrect signalling. Whenever possible, the lenses should be
disconnected from the bottom as one section to avoid accidental rearrangment.
III. SERVICE.
Federal Signal will service your equipment or provide technical assistance with any
problems that cannot be handled locally.
Any units returned to Federal Signal for service, inspection, or repair must be
accompanied by a Return Material Authorization. This R.M.A. can be obtained from
the local distributor or manufacturer's representative.
At this time a brief explanation of the service requested, or the nature of the
malfunction, should be provided.
Address all communications and shipments to:
IV. REPLACEMENT PARTS/ACCESSORIES.
Lamp, 28 V, Wedge Type, #655
Flasher, 120 V
Tulip Base
Extension Pipes
LED Module
Sound Module
Connector, Plug, 2 position
Connector, Plug, 5 position
Lens Kit (includes one lens of
each color, cap, O-rings, and
light shields)
Connector Kit (includes 3-, 4-
and 6-position connector plugs)
V. EC DECLARATION OF CONFORMITY.
Manufacturer's Name:
Manufacturer's Address:
declares that the Product
Type of Equipment:
CAUTION
Industrial Systems
Federal Signal Corporation
2645 Federal Signal Drive
University Park, IL 60484-3167
K8107185
K8285239
Model No. MSTB
Model No. MSP-4 (4"), -16 (16"), -32 (32")
Model No. MSLED-A,-B,-G,-R
Model No. MSS-024, -120, -240
K14037-02
K14037-05
K844700351
K13900226
Federal Signal Corporation
2645 Federal Signal Drive
University Park, IL 60484-3167
U.S.A.
Class III, Status Indicator Light
24 Vdc/ac
-6-