Hunter WAND Guia De Inicio Rapido página 3

WAND Quick Start Guide
WI-FI SIGNAL
Use your smartphone to check the signal strength for the
desired router connection at the controller location. If the
strength is too low, the connection will not work. In this case,
move the controller or router to improve the signal.
INSTALLING THE WI-FI MODULE
1. Insert the WAND module into the
right-side accessory port of the
X2™ controller.
When installed, WAND disables the
X2 controller's dial and button functions as well as the
existing schedule and settings. All programming is then
managed via Hydrawise™ cloud-based software from a
smartphone or desktop browser. Manual Station,
Manual Program, and Test All Stations can be activated
at the controller.
NOTE: The controller does not work with Hydrawise when the
dial is in the OFF or Manual positions. Return the dial to the
RUN position. Hidden controller features are still available.
3