Bluetooth Setup - Hunter WAND Guia De Inicio Rapido

BLUETOOTH SETUP

1. Enable the Bluetooth setting on your smartphone.
2. Connect your smartphone to the desired network.
3. Press the WAND button once:
• The solid amber
module will blink once per second.
• A 4-digit code will appear with a
Bluetooth
4. Open the Hydrawise App on your
smartphone, navigate to Setup Wizard,
and select your X2 model. Select Bluetooth
Programming and continue setup steps.
5. Once connected, the module LED will turn solid green ●.
The word "DONE" and a solid
controller LCD.
6. Continue following the instructions on the app
programming screen.
NOTE: Pairing will stop after 2 minutes if no action is taken.
Press the WAND button once to restart Bluetooth setup.
6
● LED on the
icon on the controller LCD.
icon will appear on the
●