Getting Started - Sartorius Combics Y2 Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

4

Getting Started

If necessary, connect the weighing platform (not applicable to Combics CW.S..
complete scales):
$ See the operating instructions supplied with the particular indicator.
Connect the equipment to AC power:
$ See the operating instructions supplied with the particular Combics indicator.
$ Min. torque that must be applied the cable gland when connecting the equipment
to AC power: 3 Nm
$ Min. torque for other cable glands: 5 Nm
Connect an equipotential bonding conductor (CIS indicators and CW.S..
complete scales) = grounding:
§ Connect the device to a central equipotential busbar (not included in delivery) using
a grounding conductor.
§ If necessary, seal the Combics indicator to protect it from vapors as follows:
– Use a torque wrench
– Apply 1 Nm torque to each of the 4 screws
§ Make sure the integrity of the IP67 protection is not damaged or impaired while
performing installation work. For more information about industrial protection,
contact the Sartorius Service Center.

Publicidad

Tabla de contenido
loading

Tabla de contenido