ION Tahiti Guia Del Usuario página 6

Bluetooth Connecting with Tahiti
Connecting to one Tahiti
1. Power on the Tahiti
Speaker will automatically enter Bluetooth pairing mode.
2. Navigate to your device's Bluetooth setup screen, find Tahiti Speaker, and connect.
When connected, the Bluetooth LED will be lit solid blue and you will hear "Connected" (if
voice prompts are enabled).
Note: Do not connect to Tahiti Speaker_BLE; this is reserved exclusively for connecting
to the ION Sound XP
Device" on your Bluetooth device and try to connect again.
3. To disconnect, turn off Bluetooth from your device's Bluetooth settings, or press and hold
the Bluetooth button.
Syncing multiple Tahiti
1. Connect to one Tahiti
2. Double-press the Bluetooth button on the primary speaker to enter Multi-Sync
Bluetooth LED will change from blue to solid white, and you will hear "Multi-Sync Mode" (if
voice prompts are enabled) to indicate it is in Multi-Sync
Note: Tahiti Speakers should be within 50' (15 m) of each other to properly sync. The
closer the speakers are, the faster they will sync.
Note: To exit Multi-Sync
3. Power on any other speakers. Press and hold the Bluetooth button on the secondary
speakers to disconnect any currently connected Bluetooth sources.
4. Double-press the Bluetooth button to enter Multi-Sync
The Bluetooth LED will begin flashing green and the secondary speakers should
automatically sync to the primary speaker.
5. Once a successful sync is established, the Bluetooth LED on the secondary speaker will be
lit solid green, and you will hear "Synced" from the "secondary" speaker (if voice prompts
are enabled).
Note: The Bluetooth range will be determined by the distance that your Bluetooth device is to
the "primary" speaker. See
TM
Tip: Tahiti Speaker can sync audio with other Multi-Sync
To find out more, visit ionaudio.com.
6
TM
Speaker
TM
Speaker:
TM
Speaker by holding down the Power button for 2 seconds. Tahiti
TM
app. If you experience trouble in connecting, select "Forget this
TM
Speakers:
TM
Speaker using the steps above. This will be the "primary" speaker.
TM
mode, double-press the Bluetooth button again.
Technical Specifications
TM
mode.
TM
Mode for the secondary speakers.
for Bluetooth and Multi-Sync
TM
-compatible ION Audio speakers.
TM
TM
mode. The
TM
ranges.